Gardena 4050-68 Manuel rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Gardena 4050-68. Gardena 4050-68 4 pages.
Également pour Gardena 4050-68 : Manuel rapide (4 pages)

Imprimer la page
Gardena 4050-68 Manuel rapide
5. To start and stop the robotic lawn mower
When starting the robotic lawn mower for the first time a start-up sequence begins where you
choose your language, country, date, time and personal PIN code. There is also a guide calib-
ration, where the robotic lawn mower automatically follow the guide wire.
To start the product
1. Push the STOP button to open the hatch.
2. Set the main switch to position 1 .
3. Enter the PIN code.
4. Push the START button and choose the operating mode.
5
Close the hatch.
To stop the product
1.
Push the STOP button.
6. To adjust the robotic lawn mower to suit
your yard
All settings for the robotic lawn mower are done via the menu functions.
Adjust the settings to suit the size of your lawn
Adjust the mowing time to suit your yard by using the Schedule function. If the
robotic lawn mower is allowed to mow too often, the grass may appear flattened.
Test run the robotic lawn mower through narrow passages
Narrow passages in the garden can make it difficult for the mower to find the charging station. Use the Test
function to test that the robotic lawn mower can travel through the narrow passage.
1. Place the robotic lawn mower in the charging station.
2. Select Test in the menu Installation > Lawn coverage > Area 1/2/3 > More >Test and push OK.
Then push the START button and close the hatch.
3. Check that the robotic lawn mower follows the guide wire through the passage.
a.
If the robotic lawn mower runs through the passage, the test is complete.
b.
If the robotic lawn mower does not get through the passage: Check that the guide wire has been laid
according to the instructions in the Operator's manual.
114 18 56-26
QG_P15_Gardena_EN_1141856-26_20191015.indd 4
2019-10-17
4
Schedule
Use the scheduling wizard to set a suitable schedule depending on the size of the
yard. If you want to change the schedule settings for individual days use the
Schedule - Advanced menu.
Table Work capacity
Model
GARDENA SILENO+ 1600
GARDENA SILENO+ 2000
www.gardena.com
The right to make changes without prior notice is reserved.
Copyright © 2019 GARDENA Manufacturing GmbH. All rights reserved.
www.gardena.com
About m
per hour and day
2
70 m
/ 750 ft
2
2
83m
/ 890 ft
2
2
3
1
2019-10-17 11:00:54