Gardena PowerMax Li-40/32 Manuel de l'opérateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Gardena PowerMax Li-40/32. Gardena PowerMax Li-40/32 11 pages. Battery lawnmower
Également pour Gardena PowerMax Li-40/32 : Manuel de l'opérateur (11 pages), Manuel de l'opérateur (17 pages)

Imprimer la page
Gardena PowerMax Li-40/32 Manuel de l'opérateur
1. Discharge the lithium-ion cells completely (contact the GARDENA
Service).
2. Protect the contacts on the lithium-ion cells against short circuits.
3. Dispose of the lithium-ion cells properly.

6. TROUBLESHOOTING

DANGER! Risk of injury!
Cut injury when the blade turns or the product starts
accidentally.
v Wait for the blade to stop, remove the safety key and use
gloves before you do troubleshooting.
To replace the blade:
DANGER! Risk of injury!
Cut injury when the blade turns and it is damaged, bent,
out of balance or has chipped edges.
v Do not use the product when the blade is damaged, bent,
out of balance or has chipped edges.
v Do not regrind the blade.
The GARDENA spare parts are availible from your GARDENA dealer
or from the GARDENA service.
Only use an original GARDENA blade:
• GARDENA replacement blade Art. 4100 [5822490-01].
v Let the blade replace by the GARDENA Service or a specialist dealer
authorised by GARDENA .
Problem
Possible Cause
Engine does not start
Extension cable is disconnected
or damaged.
Blade is blocked.
Engine is jammed and
Blade is blocked.
makes a noise
Cutting height is too low.
Loud noises, the mower
Screws on engine, its fixing
is rattling
or on the mower housing are
loose.
Product runs unevenly or
Blade is damaged or the blade
vibrates strongly
mounting is released.
Blade is very dirty.
Lawn is not cleanly cut
Blade is blunt or damaged.
Cutting height is too low.
ß
Error-LED
on the battery
Over voltage.
W
is flashing.
Under voltage.
Battery temperature is out
of range.
ß
Error-LED
on the
Battery error / battery defective. v Contact the GARDENA
W
battery lit
Charging control lamp
(15)
Battery charger or charging
does not light up
cable are not connected
correctly.
(15)
Charging control lamp
Battery temperature is out of
is flashing rapidly
range.
(4 times per second)
V
Error-LED
on the
Battery error.
charger is flashing
V
Error-LED
on the
Temperature inside the
charger lit
charger is to high.
12

7. TECHNICAL DATA

Battery Lawnmower
Speed of rotation cutting
blade
Cutting width
Cutting height adjustment
(12 positions)
Volume of grass box
Weight
Sound pressure level L
Uncertainty k
Sound power level L
measured/guaranteed
Uncertainty k
Hand/arm vibration a
Uncertainty k
System Battery /
smart Battery
Lawn area which can be
cut per battery charge
• from 60 mm to 40 mm
• from 80 mm to 40 mm
Battery voltage
Battery capacity
Remedy
Battery charging time
v Connect the extension cable
approx. 80 % / 100 %
or if necessary replace it.
v Remove the obstacle.
Battery Charger
v Remove the obstacle.
Rated Power
v Raise the cutting height.
Mains voltage
v Have screws tightened by an
Mains frequency
authorised specialist dealer
or the GARDENA Service.
Battery charging time
for Art. 9842 / 19090
v Have blade tightened or
approx. 80 % / 100 %
replaced by an authorised
specialist dealer or the
Battery charging time
GARDENA Service.
for Art. 9843 / 19091
approx. 80 % / 100 %
v Clean the mower
(see 4. MAINTENANCE).
Measuring process complying with:
If this does not rectify the
problem, contact the
GARDENA Service.
v Have blade replaced by the
exposure. The vibration emission value can vary during actual use of the electric power
GARDENA Service.
tool.
v Raise the cutting height.
v Remove the battery and
8. ACCESSORIES
check that the mains voltage
is correct.
GARDENA Replacement
v Charge the battery.
Battery BLi-40/100 /
BLi-40/160
v Use the battery in surroun-
dings where temperatures
GARDENA smart Battery
are between 0 °C and 40 °C.
BLi-40/100 / BLi-40/160
GARDENA smart Battery
service.
BLi-40/100 Set /
BLi-40/160 Set
v Connect the battery charger
and charging cable correctly.
GARDENA Battery Charger
QC40
v Use the battery in surroun-
GARDENA Replacement
dings where temperatures
Blade
are between 0 °C and 40 °C.
v Remove the battery and

9. SERVICE / WARRANTY

check that you use an
original GARDENA battery.
Service:
v Contact the GARDENA
service.
Please contact the address on the back page.
NOTE: For any other malfunctions please contact the GARDENA service depart-
ment. Repairs must only be done by GARDENA service departments or specialist
dealers approved by GARDENA.
Unit
Value (Art. 5033)
R/min.
3,300
cm
32
cm
2 to 6
l
30
kg
8.4
73
1)
dB (A)
PA
3
PA
:
2)
WA
86 / 86
dB (A)
0.59
WA
1.64
1)
m/s
2
vhw
1.5
a
Unit
Value (Art. 9842 / 19090) Value (Art. 9843 / 19091)
m
280
2
(approx.)
200
V
max. 40 (The maximum
initial noload voltage of
the battery is 40 V, the
nominal voltage is 36 V)
Ah
2.6
min.
65 / 90
Unit
Value (Art. 9845)
W
100
V
230
Hz
50
min.
65 / 90
min.
105 / 140
EN 60335-2-77;
1)
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
Battery for additional duration or
for replacement.
smart Battery for the smart System.
smart Battery with smart Gateway for
the smart System.
Battery Charger to charge the GARDENA
Batteries and smart Batteries.
As replacement for blunt blade.
450
350
max. 40 (The maximum
initial noload voltage of
the battery is 40 V, the
nominal voltage is 36 V)
4.2
105 / 140
RL 2000/14/EC
2)
Art. 9842/9843
Art. 19090/19091
Art. 19110/19111
Art. 9845
Art. 4100
[5822490-01]