Lexmark C925 Manuel de déménagement

Parcourez en ligne ou téléchargez le pdf Manuel de déménagement pour {nom_de_la_catégorie} Lexmark C925. Lexmark C925 2 pages. Setup sheet
Également pour Lexmark C925 : Manuel de l'administrateur (20 pages), Manuel de l'administrateur (12 pages), Manuel de connexion (7 pages), Note de mise à jour (4 pages), Manuel de l'administrateur (13 pages), Manuel d'entretien (15 pages), Manuel (14 pages), Manuel de l'administrateur (12 pages), Référence rapide (10 pages), Manuel papier (3 pages), Carte du menu (2 pages), Manuel des fournitures (2 pages), Manuel d'information (1 pages), Manuel des défauts d'impression (1 pages), Installation (2 pages), Référence rapide (12 pages), Formation aux services (18 pages)

Imprimer la page
Lexmark C925 Manuel de déménagement
Moving guide

Selecting a location for the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained
personnel to lift it safely.
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options,
leave enough room for them too. It is important to:
•
Set up the printer near a wall outlet.
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156
standard.
•
Provide a flat, sturdy, and stable surface.
•
Keep the printer:
–
Away from the direct airflow of air conditioners, heaters, or ventilators
–
Free from direct sunlight, humidity extremes, or temperature fluctuations
–
Clean, dry, and free of dust
•
Allow the following recommended amount of space around the printer for proper ventilation:
1
385 mm (15.16 in.)
2
609.6 mm (24.0 in.)
3
100 mm (3.94 in.)
4
100 mm (3.94 in.)
5
100 mm (3.94 in.)

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:
•
Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to
move the options must have a surface able to support the dimensions of the options.
•
Keep the printer in an upright position.
•
Avoid severe jarring movements.
5
4
3
2
Moving guide
Page 1 of 2
1