Gardena smart SILENO city Manuel rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Gardena smart SILENO city. Gardena smart SILENO city 4 pages.
Également pour Gardena smart SILENO city : Manuel rapide (4 pages), Manuel rapide (4 pages)

Imprimer la page

GETTING STARTED WITH

THE GARDENA ROBOTIC LAWNMOWER

1. Installing the charging station

See chapters 3.2 and 3.3 in the supplied operator's manual or on the

GARDENA website (www.gardena.com).

1. Place the charging station on a flat, level surface where there is open space.

2. Connect the low voltage cable to the charging station and the power supply.

3. Connect the power supply to a 100-240 V wall socket.

4. Press the ON/OFF button to turn the robotic lawnmower on. Place the robotic

lawnmower in the charging station to charge the battery while the boundary wire is

laid.

2. Laying the boundary wire

See chapter 3.5 in the supplied operator's manual or on the

GARDENA website (www.gardena.com).

1. Lay the boundary wire so that it forms a loop around the

whole working area.

2. Make an eyelet at the point on the boundary wire where the

guide wire is later connected.

1. STOP button

2. LED for function check of the

boundary and guide wires

3. Charging station

4. Display

5. Keypad

6. ON/OFF button

7. Start button

P01 QG_EN_3.indd 2

0 cm / 0"

10 cm / 4"

30 cm / 12

10 cm / 4"

35 cm / 14"

2017-12-14 13:46:03