Gardena 1481 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 1481. Gardena 1481 19 pages. Pressure tank unit electronic plus with dry-running safety
Également pour Gardena 1481 : Manuel d'utilisation (18 pages)

Imprimer la page

For Austria

For Switzerland

Using the pump for

domestic water supply

Working environment

Visual check

Check voltage

Notes on Use

Filter lid and

backflow valve lid

Never carry the pump

by its cable

Remove plug

Preventing dry-running

Wear and reduction

in output

Unsuitable for

continuous operation

Minimum flow rate

Max. permissible

internal pressure

In Austria, the electrical connections must be made according to

ÖVE-EM 42, T2 (2000)/1979 § 22 based on § 2022.1. Pursuant

to this regulation it's imperative to operate pumps for swimming

pools and garden ponds exclusively via an isolating transformer.

Please ask your electrician.

In Switzerland mobile appliances which are used outdoors, must

be connected via a residual-current device.

When using the pump for domestic water supply, please adhere

to the local water and sewerage regulations. In addition observe

the regulations of DIN 1988. When connecting the pump to the

water supply system, the country-specific sanitary regulations

must be observed to prevent water not of drinking water quality

being drawn back in.

➔ If necessary, contact your sanitary expert.

Protect the pump from rain. Don't use the pump in wet or moist

area.

Before operating the pump, first make a visual check, if there is

any damage of the pump (esp. regarding power cable and plug).

A damaged pump must not be used. In case of damage, please

have the pump checked by our GARDENA Service Centre or

by an authorised electrician.

Check line voltage. Data indicated on the type plate must match

technical data of the mains supply.

Ensure that the filter lid and lid of the backflow valve are

screwed on tight during operation.

Don't use the power cable for carrying the pump or for plugging

off. Protect the power cable from heat, oil and sharp edges.

Please unplug the pump after operation and before carrying

out any maintenance works.

In order to avoid dry-running of the pump, take care that the

end of the suction hose is always submerged into the liquid.

Sand and other abrasive substances in the liquid cause

increased wear and reduce the pump's output.

The pump is not designed for continuous operation (e.g.

industrial application, continuous circulating operation).

The minimum flow rate is 90 I / h (= 1.5 I / min). Watering

accessories with lower rate must not be operated.

When using the pump for pressure intensification, the max.

permissible internal pressure of 6 bar (on the delivery side)

must not be exceeded. The to be increased delivery pressure

and the pump pressure sum up.

Example: pressure at the water tap 1.5 bar, max. pressure

of the GARDENA Pressure Tank Unit 4000 / 4 electronic plus

4.4 bar, total pressure 5.9 bar.