Gardena 7888 Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 7888. Gardena 7888 10 pages. Underwater filter with fountain pump set
Également pour Gardena 7888 : Manuel d'utilisation (11 pages)
Imprimer la page
4. Initial Operation
Commissioning the Pond Filte r :
7
5. Maintenance
Cleaning the Filter :
A
3
6
1
D
7
E
0
10
A Commissioning the Pond Filter and Fountain :
1. Place the Pond Filter and Fountain on a firm base so that the
filter housing
water).
2. Plug mains plug into an AC power socket.
Warning: Pump will start immediately.
3. Adjust the water flow with the regulating
7
valves
correct for the fountain / gargoyle.
4. Water Bell, Fleur-de-Lis and Water Jet :
screw the fountain insert into the nozzle
tube until the fountain achieves the
desired shape.
Note : The ball joint
compensate for uneven ground.
B Commissioning the Pond Filter and stepped nipple :
1. Place the Pond Filter and stepped nipple on a firm base so that
the filter housing
water).
2. Plug mains plug into an AC power socket.
Warning: Pump will start immediately.
Warning ! Electric shock !
V Disconnect the pump from the mains before working on it.
Do not use any hard objects or powerful detergents for cleaning
the set!
1. Take the Pond Filter out of the water and unscrew the nozzle
1
tube
2. Release the catches
B
3. Remove the pump
4. Remove filter gravel
the filter surrounds
C
5. Wash out the filter housing
filter surrounds
6. Place the biological surface filter
it under running water).
7. Reassemble the Pond Filter in the reverse order. Be sure to
route the cable in its guides
F
7
is fully covered with water (max. 2 m under
5
8
/
so that the flow rate is
9
can be used to
7
is fully covered with water (max. 2 m under
6
/ stepped nipple
.
0
and take out the filter housing
A
from the filter block
C
and biological surface filter
E
.
7
E
under running water.
F
5
B
.
D
B
, filter block
, gravel
D
in clean water (do not wash
.
3
1
8
9
7
.
and both
C
and