Gardena 8200 Manuel de l'opérateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Gardena 8200. Gardena 8200 7 pages. Clear/dirty water submersible pump
Également pour Gardena 8200 : Manuel de l'opérateur (13 pages), Manuel de l'opérateur (14 pages)
Imprimer la page
10
9
7. Place the pressure regulator
with the filter
5
at the level of the side inlets.
Make sure to install the pressure regulator
the arrow
on the pressure regulator
13
8. On each side, screw a connector (art. 2758)
regulator
.
5
9. Close the lid
of the valve shaft
.
12
10
10. Fill the hole with soil, and compact it carefully.
8
12
5
13
9
,
and
pointing upwards in the valve shaft
2
3
4
correctly in the direction of the water flow indicated by
5
.
5
finger-tight onto the male threads of the pressure
9
2. MAINTENANCE
2.1.
To flush the pressure regulator
We recommend flushing the pressure regulator once a month.
1. Close the water supply.
2. Remove the cap
.
4
10
3. Open the water supply for approx. 5 seconds.
4. Close the water supply
This cleans the filter
2
If the filter is still dirty, repeat the last two steps.
5. Mount the cap
.
4
6. Open the water supply for further operation.
2.2. To clean the pressure regulator
We recommend cleaning the pressure regulator manually once a year.
1. Close the water supply.
2. Open the housing ring
3. Remove the filter
carefully.
2
4. Rinse the filter
thoroughly with clean water.
2
5. Insert the filter
into the pressure regulator.
2
6. Mount the housing ring
7. Open the water supply for further operation.
4
3
2
1
of coarse dirt.
.
3
and tighten it hand-tight.
3
9