Lexmark CX410 series Manuel de copie

Parcourez en ligne ou téléchargez le pdf Manuel de copie pour {nom_de_la_catégorie} Lexmark CX410 series. Lexmark CX410 series 4 pages. Cx410 series multifunction colour laser printer
Également pour Lexmark CX410 series : Note technique (3 pages), Manuel du courrier électronique (4 pages), Manuel du fax (4 pages), Manuel des fournitures (3 pages), Feuille de configuration (2 pages), Manuel d'information (1 pages), Spécifications (2 pages), Manuel d'entretien (20 pages)

Imprimer la page
Lexmark CX410 series Manuel de copie
Copy guide

Making a quick copy

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure the size of the original document and the size of the copy paper are the same.
3
From the printer control panel, press

Copying using the ADF

1
Load an original document faceup, short edge first into the ADF tray.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > specify the copy settings > Copy It

Copying using the scanner glass

1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > specify the copy settings > Copy It
If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page.
3
Touch Finish the Job.

Copying photos

1
Place a photo facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > Content > Photo >
3
From the Content Source menu, select the appropriate setting that best matches the original photo.
.
Copy guide
Page 1 of 4