Avaya IP Office Phone Manager Aide à l'emploi - Page 2
Parcourez en ligne ou téléchargez le pdf Aide à l'emploi pour {nom_de_la_catégorie} Avaya IP Office Phone Manager. Avaya IP Office Phone Manager 6 pages. Ip office discontinued control unit
Également pour Avaya IP Office Phone Manager : Aide à l'emploi (8 pages), Notes d'application (17 pages), Notes d'application (17 pages), Manuel de l'utilisateur (4 pages), Manuel de l'utilisateur (7 pages)
Imprimer la page
Using the DECT Site Survey Kit
Using the DECT Site Survey Kit
Using the Site Survey Kit
The Survey Base Station
Using the DECT Site Survey Kit
IP Office - Job Aid
Guidance on where to start the survey and order in which to do a survey is
difficult, each case is unique and much relies on experience. Ensure that
conditions are as near to normal as possible, ie. if possible do the survey
on a normal working day when the building is in use. Check which areas
you can enter and when.
The Survey Base Station is a DECT Base Station able to transmit without
being connected to a telephone system. It is supplied with a suitable mains
power supply unit. As well as providing an RSSI/Q52 signal it can accept
audio input via a 3.5mm audio-jack input for a user audio quality check.
Subscribe
Button
Audio Input
–
Power Socket:
The Survey Base Station is supplied with a suitable power supply
terminated with an RJ11 connector. The connector uses Pin 6 (-ve) and
Pin 5 (+ve) to provide a 9V dc, 150mA supply.
–
Audio In Socket:
Standard 3.5 mono jack socket input.
Subscribe Button:
–
If pressed and held for 3 seconds, puts the Survey Base Station in
subscribe mode for the following minute. The base stations system
ID is printed on its back. Its account number is 1234 (on older
versions this may be 12345678).
Using the Site Survey Kit
Power Supply Input:
9VDC 150mA.
067 Issue 1 (8th July 2003)
Page 2