KitchenAid KEBDS 90020 Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} KitchenAid KEBDS 90020. KitchenAid KEBDS 90020 16 pages.
• The product is not suitable for outdoor use.
• When the hob is in use, accessible parts of the
hood may become hot.
• Never flame cook food (flambé) under the
appliance. Using free flames might cause fire.
• Do not leave frying pans unattended when
frying, as the frying oil may catch fire.
Declaration of conformity
• This appliance has been designed, manufactured
and marketed in compliance with:
- safety objectives of the "Low Voltage" Directive
2006/95/EC (which replaces 73/23/EEC and
subsequent amendments);
- the ecodesign requirements of european
regulations n. 65/2014, and n. 66/2014 in
conformity to the european standard EN 61591
- the protection requirements of Directive "EMC"
2004/108/EC.
Electrical safety of the appliance can only be
guaranteed if it is correctly connected to an
approved earthing system.
Scrapping of household appliances
• This appliance is manufactured with recyclable
or reusable materials. Dispose of it in
accordance with local waste disposal
regulations. Before disposing of it, make it
unusable by cutting off its power supply cable.
• For further information on the treatment,
recovery and recycling of household appliances,
contact your competent local authority, the
collection service for household waste or the
shop where you purchased the appliance.
KEEP THESE INSTRUCTIONS
Energy saving tips
• Switch ON the hood at minimum speed when
you start cooking and kept it running for few
minutes after cooking is finished.
• Increase the speed only in case of large amount
of smoke and vapour and use boost speed(s) only
in extreme situations.
• Replace the charcoal filter(s) when necessary to
maintain a good odour reduction efficiency.
• Clean the grease filter(s) when necessary to
maintain a good grease filter efficiency.
• Use the maximum diameter of the ducting
system indicated in this manual to optimize
efficiency and minimize noise.
5