Gardena RP 240 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena RP 240. Gardena RP 240 20 pages. Indoor fountain pump
Également pour Gardena RP 240 : Manuel d'utilisation (18 pages)

Imprimer la page

The temperature of the liquid used must not

be below 4 °C or above 35 °C.

Sand and other abrasive substances in the

liquid cause increased wear and reduce the

output of the pump.

3. Initial Operation

Starting up the pump :

RP 240

RP 300

RP 420

RP 600

Please observe the local noise prevention

regulations.

1. RP 600 : Insert the fountain socket

2. Install the pump at ground level so that the filter housing

is standing in water to at least half its height (with pumps

RP 240 / RP 300 / RP 420 make sure that the sides of the

foam filter under the pump are not blocked).

3. Plug mains plug into an AC power socket.

Warning : Pump will start immediately.

4. Use the flow control

fountain pump.

and nozzle tube

to set the desired water flow for the