Avaya Norstar M7310 Manuel de référence rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Avaya Norstar M7310. Avaya Norstar M7310 3 pages. Digital deskphone for ip office
Erasing a memory button
You can delete the current memory button programming to
reprogram it with a different number or feature.
1. Press Feature * 1.
2. Press the memory button you want to erase.
3. Press OK to delete the current memory button programming
from the telephone memory.
Displaying memory button programming
Use the following task to display the telephone number or feature
currently programmed to the memory button.
1. Press Feature * 0.
2. Press the memory button you want to check.
3. Press Feature or Release when finished.
Making and answering calls
Use the following tasks to make and answer calls on your M7310
Digital Deskphone.
Making external calls using line buttons
Use the following task to make a call to an external telephone
number using a line button.
1. Lift the handset
2. Press a line button. The line button indicator turns on.
3. Dial the external telephone number.
Making external calls using intercom buttons
Use the following task to make a call to an external telephone
number using an intercom button.
Note:
Contact your system administrator for a list of external dialling
codes.
1. Lift the handset
2. Press an intercom button. The indicator button turns on.
3. Enter an external dialling access code.
4. When you hear the external dial tone, dial the external telephone
number.
Making Internal calls using intercom buttons
Use the following task to make a call to an internal extension using
an intercom button.
Note:
Contact your system administrator for a list of extension numbers.
1. Lift the handset
2. Press an intercom button. The intercom button indicator turns
on.
3. Dial the extension number.
Answering calls
An incoming call is available to be answered when your telephone
rings and the display light flashes, or when an intercom or line button
indicator flashes.
When an incoming call appears on your telephone, lift the
handset
OR
Press the button with the flashing ▲ indicator before you lift the
handset.
Placing a call on hold
Use the following task to place an active call on hold.
Note:
Calls are put on hold automatically when you switch from one line
to another.
1. While on a call, press Hold . The ▲ indicator for the line will
flash.
2. Press the line button with the flashing ▲ indicator to retrieve the
call.
Muting a call
You can mute your voice on an active call. This task applies to
handset, handsfree, and headset calls.
1. While on a call, press Mute to turn the microphone off. The
indicator light next to the Mute button flashes when the
microphone is muted.
2. Press Mute again to turn the microphone on.
Making a handsfree call
Your system administrator must program the handsfree feature on
your telephone. The handsfree button is assigned to the bottom right
memory/line button.
Press the handsfree button on your telephone to make or
answer a call.
OR
To switch to handsfree when you are on a call, press the
handsfree button and place the handset on the cradle. Lift the
handset off the cradle to turn off handsfree mode.
Using a headset
You can make and answer calls using a headset instead of using
the handset..
1. Press the Headset button on your telephone to activate headset
mode. This can be done if you want to make a call, to answer
an incoming call, or to switch to the headset during an active
call.
2. Replace the handset on the cradle. Lift the handset off of the
cradle to switch back.
M7310 Digital Deskphone
for IP Office Quick
Reference Guide
March 2011