Broadata LBC-H-R-DOP Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Broadata LBC-H-R-DOP. Broadata LBC-H-R-DOP 16 pages. Link bridge hdbaset hdmi receiver with dual video output

Imprimer la page

2.2 Rear Panel

POWER

DC 24V

1. POWER LED:

will illuminate.

2. DC 24V: Plug the 24V DC power supply into the unit and connect

the adaptor to an AC outlet.

3. IR 2 BLASTER: Connect to the supplied IR Blaster cable for IR

signal transmission. Place the IR Blaster in direct line-of-sight of

the equipment to be controlled.

4. IR 1 EXTENDER: Connect to the supplied IR Extender cable

for IR signal reception. Ensure that remote controller being used

is within the direct line-of- sight of the IR Extender.

5. USB: This port is reserved for firmware update only.

6. LINK LED: The link LED will illuminate when both the input source

and output display signals are connected through CAT cable.

When it blinks regularly it states the display is NOT sending

signals to Receiver but the Transmitter and Receiver are linked

and if it blink irregularly it states an error has occurred.

7. CAT-5e/6/7 IN: Connect this port to HDMI to CAT-5e/6/7

Transmitter (with or without PoC function) with CAT-5e/6/7 cable

to extend the signal up to 100m.

Broadata Technical Support, [email protected]

Link Bridge

HDBaseT HDMI Receiver w/Dual Video Output

IR 2

BLASTER

USB

IR 1

EXTENDER

Once the power supply is connected the LED

LBC-H-R-DOP User Manual

CAT5e/6/7 IN

LINK