Gardena 9834 Manuel de l'opérateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Gardena 9834. Gardena 9834 9 pages. Electric hedge trimmer
Également pour Gardena 9834 : Manuel de l'opérateur (13 pages), Manuel de l'opérateur (9 pages), Manuel de l'opérateur (13 pages), Manuel de l'opérateur (9 pages), Manuel de l'opérateur (10 pages)
Imprimer la page
(2)
3. Tighten both screws
with a screwdriver.
Make sure that the screws
(2)
can be fully pushed.
3. OPERATION
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Disconnect the product from the mains and slide the
protective cover over the blade before you connect or
transport the product.
To connect the hedge trimmer [ Fig. O1 ]:
DANGER! Risc of electric shock!
To avoid damage to the mains cable
cable
(4)
must be inserted into the cable lock
v Before you operate the product insert the extension cable
into the cable lock
(5)
.
v Never take hold of the protective cover when connecting the
product.
(4)
1. Loop the extension cable
, insert the loop into the cable lock
pull tight.
(6)
2. Connect the plug
of the product into the socket
of the extension cable.
3. Connect the extension cable
(4)
Work positions:
The product can be operated in 3 positions.
• Side trimming [ Fig. O2 ]
• High trimming [ Fig. O3 ]
• Low trimming [ Fig. O4 ]
To start the hedge trimmer [ Fig. O5 ]:
DANGER! Risk of injury!
Risc of injury if the product does not stop when you
release the start button.
v Do not bypass the safety devices or switches. For example do
not attach the start buttons
To start:
The product is fitted with a twohanded safety device
(2 start buttons) to prevent the product from being turned
on by accident.
1. Remove the protective cover from the blade.
2. Hold the front handle
(8)
with one hand and push the start button
3. Hold the main handle
(10)
with the other hand and push the start
button
(11)
.
The product will start.
To stop:
1. Release the two start buttons
2. Slide the protective cover over the blade.
4. MAINTENANCE
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Disconnect the product from the mains and slide the protective
cover over the blade before you do maintenance.
To clean the hedge trimmer:
DANGER! Risc of electric shock!
Risk of injury and risk of damage to the product.
v Do not clean the product with water or with a water jet
(in particular highpressure water jet).
1. Clean the product with a damp cloth.
2. Clean the airflow slots with a soft brush (do not use a screwdriver).
3. Lubricate the blade with a low viscosity oil (e. g. GARDENA
Maintenance Oil Art. 2366). Avoid contact with the plastic parts.
are fully tightened and the start button
(3)
the extension
(5)
.
(7)
into a 230 V mains socket.
(9)
/
(11)
to the handle.
(9)
/
(11)
.
5. STORAGE
(9)
To put into storage:
The product must be stored away from children.
1. Disconnect the product from the mains.
2. Clean the product (see 4. MAINTENANCE) and slide the
protective cover over the blade.
3. Store the product in a frost-free place before the first frost arrives.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal household waste.
It must be disposed of in line with local environmental regulations.
IMPORTANT!
v Dispose of the product through or via your municipal recycling
collection centre.
(4)
6. TROUBLESHOOTING
(5)
and
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Disconnect the product from the mains and slide the protective
cover over the blade before you do troubleshooting.
Problem
Product does not start
Product can no longer
be stopped
Hedge is not cleanly cut
NOTE: For any other malfunctions please contact the GARDENA service depart-
ment. Repairs must only be done by GARDENA service departments or specialist
dealers approved by GARDENA.
7. TECHNICAL DATA
Electric Hedge Trimmer
Rated Power
Mains voltage
(9)
.
Mains frequency
Strokes
Length of blade
Tooth gap of blade
Weight
Sound pressure level L
1)
pA
Uncertainty k
pA
Sound power level L
:
2)
WA
measured/guaranteed
Uncertainty k
WA
Hand/arm vibration a
1)
vhw
Uncertainty k
a
Measuring process complying with:
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
exposure. The vibration emission value can vary during actual use of the elec-
tric power tool.
8. ACCESSORIES
GARDENA Maintenance Oil
GARDENA Collecting Bag
Cut&Collect Comfort-
Cut / PowerCut
Possible Cause
Remedy
Extention cable is discon
v Connect the extension cable
nected or damaged.
or if necessary replace it.
Blade is blocked.
v Remove the obstacle.
Start button is stuck.
v Disconnect the mains and
loosen the start button.
Blade is blunt or damaged.
v Have blade replaced by
GARDENA Service.
Unit
Value (Art. 9833) Value (Art. 9834) Value (Art. 9835)
W
550
600
V
230
230
Hz
50
50
1/min
3400
3400
cm
50
55
mm
27
27
kg
3.6
3.7
84
85
dB (A)
3
3
95 / 96
96 / 97
dB (A)
1.11
0.99
2.6
3.1
m/s
2
1.5
1.5
EN 60745215
RL 2000/14/EC
1)
2)
Extends the life of the blade.
Easy and comfortable collecting of the
chopped property.
700
230
50
3400
65
27
3.9
87
3
97 / 99
1.69
3.1
1.5
Art. 2366
Art. 6002
9