Gardena 9836-28 Manuel de l'opérateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Gardena 9836-28. Gardena 9836-28 10 pages. Battery hedge trimmer
Également pour Gardena 9836-28 : Manuel de l'opérateur (9 pages)

Imprimer la page

2. OPERATION

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

v Wait for the blade to stop and slide the protective cover over

the blade before you transport the product.

To charge the battery [ Fig. O1 ]:

CAUTION!

Overvoltage damages the battery and the charging power

supply.

v Make sure that you use the correct mains voltage.

Before you use the battery the first time, the battery must be completely

charged.

The lithium-ion battery can be charged in any state of charge and the

charging process can be disconnected at any time without to damage

the battery (no memory effect).

1. Connect the charging power supply

The power LED

(Lc)

illuminates red.

2. Connect the battery charger cable

When the charging control lamp

flashes green, the battery is being charged.

When the charging control lamp

illuminates green, the battery is completely charged

(Charging time, see 6. TECHNICAL DATA).

3. Examine the charge status regularly while you charge.

4. When the battery is completely charged, disconnect the battery charger

cable

(E)

from the charging socket

5. Disconnect the charging power supply

Work positions:

The hedge trimmer can be operated in 3 positions.

– Side trimming [ Fig. O2 ]

– High trimming [ Fig. O3 ]

– Low trimming [ Fig. O4 ]

To start the hedge trimmer [ Fig. O5 ]:

DANGER! Risk of injury!

Risk of injury if the product does not stop when you

release the start levers.

v Do not bypass the safety devices or switches. For example do

not attach the start levers to the handle.

To start:

The product is provided with a two-handed safety device (2 start

levers with starting lockout) to prevent the product from being

turned on by accident.

1. Remove the protective cover from the blade.

(1)

2. Hold the front handle

with one hand and push the front start lever

3. Hold the main handle

(3)

with the other hand, push the starting

(4)

lockout

forward and pull the rear start lever

The hedge trimmer starts.

4. Release the starting lockout

(4)

To stop:

(2)

1. Release the two start levers

The hedge trimmer stops.

2. Wait for the blade to stop and slide the protective cover over the blade.

3. MAINTENANCE

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

v Wait for the blade to stop and slide the protective cover over

the blade before you maintain the product.

(C)

into a mains socket.

(E)

to the charging socket

;

at the charging socket

;

at the charging socket

;

(C)

from the mains.

(5)

again.

(5)

To clean the Hedge Trimmer [ Fig. M1 ]:

DANGER! Risk of injury!

Risk of injury and risk of damage to the product.

v Do not clean the product with water or with a water jet

(in particular high-pressure water jet).

v Do not clean with chemicals including petrol or solvents.

Some can destroy critical plastic parts.

The airflow slots must always be clean.

1. Clean the product with a damp cloth.

(6)

2. Clean the airflow slots

3. Spray the blade with the GARDENA Cleaning Spray, Art. 2366.

Avoid contact of the oil with the plastic parts.

To clean the charging power supply:

Make sure that the contacts of the charging socket and the charging

power supply always are clean and dry before you connect the charging

power supply.

Do not use running water.

v Clean the contacts and the plastic parts with a soft and dry cloth.

4. STORAGE

To put into storage:

The product must be stored away from children.

1. Charge the battery.

2. Clean the hedge trimmer and the charging power supply

(see 3. MAINTENANCE).

3. Store the hedge trimmer and the charging power supply in a dry,

enclosed and frost-free place.

5. TROUBLESHOOTING

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

v Wait for the blade to stop and slide the protective cover over

the blade before you troubleshoot the product.

Problem

Possible Cause

Hedge is not cleanly cut

Blade is blunt or damaged.

Hedge trimmer does not

Under voltage.

start. Charging control

;

lamp

flashes green

Hedge trimmer does not

Battery overload.

start. Charging control

;

lamp

flashes red

Blade is blocked.

Battery temperature is out of

(2)

range.

Power LED

(Lc)

on the

Charging power supply is not

charging power supply

plugged in correctly.

does not illuminate

NOTE: For any other malfunctions please contact the GARDENA service depart-

ment. Repairs must only be done by GARDENA service departments or specialist

dealers approved by GARDENA.

6. TECHNICAL DATA

Battery Hedge Trimmer

Unit

Strokes

1/min

Length of blade

Tooth gap of blade

Weight

Sound pressure level L

dB(A)

Uncertainty k

with a soft brush (do not use a screwdriver).

Remedy

v Let the blade be replaced by

the GARDENA Service.

v Charge the battery.

v Release the start levers.

Start again.

v Remove the obstacle.

Start again.

v Use the battery in surround-

ings where temperatures are

between 0 °C and 40 °C.

v Plug the charging power

supply into a wall outlet.

Value (Art. 9836)

2400

2.2