Broadata LBC-HDBT-R-48 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Broadata LBC-HDBT-R-48. Broadata LBC-HDBT-R-48 16 pages. Hdmi transmission with 48v poh over 60m

Imprimer la page

LBC-HDBT-T/R-48-Lite User Manual

Link Bridge

HDBaseT HDMI Transmission w/48V PoH over 60m

4.0 MAINTENANCE AND TROUBLESHOOTING

4.1 Maintenance

There is no operator maintenance other then keeping the units

clean. However, observe the following light indicators to make

sure that the unit is working properly:

4.2 Troubleshooting

If the LBC-HDBT-T/R-48-Lite units do not operate properly

after installation, check for possible cable breaks, loose

connections, and incorrect cable connections. If problems

persist that may be fiber related, contact BCI at 1-800-214-0222

for further assistance.

For electrical problems, perform the following troubleshooting

procedures:

1. If the POWER indicator is OFF, check for the following:

a. The line cord is plugged into the unit and your outlet

has power.

2. If the POWER indicator is ON, but the Link indicator is

OFF, check for the following:

a. Make sure the appropriate cables are being used.

b. Cable and cable connectors are not broken.

c. For each unit, the transmit (TX) cable is connected to

the other unit's receiver (RX).

3. If the POWER indicator and Link indicator are ON, but

the channels are not operating, then:

a. Check to see that the attached user equipment is turned

on.

b. Both ends of the link are connected to the corresponding

equipment and to the same corresponding channel port.

Broadata Technical Support, (800) 214-0222