Broadata LBC-HDBT-R-48 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Broadata LBC-HDBT-R-48. Broadata LBC-HDBT-R-48 16 pages. Hdmi transmission with 48v poh over 60m

Imprimer la page

LBC-HDBT-T/R-48-Lite User Manual

Link Bridge

HDBaseT HDMI Transmission w/48V PoH over 60m

2.2 Receiver Front and Rear Panels

BLASTER

STD UPDATE

1. IR2 BLASTER: Connect to the supplied IR Blaster cable for IR

signal

transmission. Place the IR Blaster in direct line-of-sight of

the equipment to be controlled.

2 . IR1 EXTENDER: Connect to the supplied IR Extender cables

for IR signal reception. Ensure that remote being used is within

the direct line-of-sight of the IR Extender.

3 . CAT-5e/6/7: Connect to the Transmitter unit with a single

CAT-5e/6/7 cable for transmission of all data signals.

4 . HDMI OUT: Connect to a HDMI equipped TV/monitor for display

of the HDMI input source signal.

5. STD/UPDATE Switch: This switch is reserved for factory use

only.

6. RS-232 OUT: Connect to the device that is to be controlled (via

D-Sub 9-pin female cable) by RS-232 commands.

IR2

IR1

EXTENDER

RS-232 OUT

Broadata Technical Support, (800) 214-0222

Front

HDMI OUT

Rear

POWER

LINK