Gardena EasyCut 400 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena EasyCut 400. Gardena EasyCut 400 10 pages. Gardena electric hedge trimmer operating instructions
Également pour Gardena EasyCut 400 : Manuel d'utilisation (10 pages), Manuel d'utilisation (14 pages), Manuel d'utilisation (10 pages), Manuel d'utilisation (7 pages), Manuel d'utilisation (10 pages), Manuel d'utilisation (15 pages), (Manuel d'utilisation (8 pages)

4. Operation

Mowing correctly:

Adjusting the cutting height:

Storage:

To produce a well-maintained lawn we recommend cutting the

lawn regularly once a week if possible. The lawn becomes thicker

if cut frequently.

Relatively long cut grass (> 1 cm) must be removed so that the

lawn does not become yellow and matted.

After relatively long intervals between mowing (e. g. holiday),

first of all cut in one direction with the cutting height as high as

possible (42 mm), then cut in the crosswise direction at the

cutting height required. The blades of grass should not be more

than 12 cm long if they are to be cut with a cylinder mower.

If possible only cut the grass when it is dry. If the grass is damp,

the cutting pattern will be uneven.

The cutting height can be set to any position from 12 mm

to 42 mm in 4 steps.

1. Lay the mower onto the

ground, so that it cannot fall

over when adjusting the cut-

ting height.

2. Pull both height adjustment

mechanisms

and allow

them to engage at the required

height on the scale

The height adjustment mechanisms

same height on both sides.

CAUTION! The mower may only be adjusted to a depth

in which the lower blade does not touch the ground when

it is uneven.

v Clean cylinder mower before storage (see 6. Maintenance) and

store in a dry place.

To save space, the upright can be collapsed by opening up the

clamping nuts.

must always be set to the