Gardena EasyCut Li-18/23 Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena EasyCut Li-18/23. Gardena EasyCut Li-18/23 17 pages. Accu turbotrimmer
Imprimer la page
5. Operation
DANGER!
Setting the working position:
z
Setting the trimmer to body
height:
h
o
1
t
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
v Never bypass the safety devices or switches (e.g. by tying
the safety lock to the handle).
Risk of injury!
v Remove the battery prior to each adjustment of the
working position, to the shaft length, additional handle
or plant guard!
Working position 1:
Standard trimming
Working position 1:
For standard trimming.
Working position 2:
1. Press the foot pedal
desired working position.
2. Release the foot pedal
CAUTION! Avoid contact between the ground and the trimmer
head in working position 1 + 2.
Setting the shaft length:
v Loosen the clamping sleeve
desired shaft length and re-tighten the threaded collar
t
The clamping sleeve
prevent the shaft from being moved.
Setting the additional handle:
o
v Pull the lock
belonging to the additional handle
set the additional handle
o
release the lock
.
If the trimmer is correctly set to the body height, the posture
is upright and the trimmer head in working position 1 is tilted
forwards slightly.
v Hold the trimmer by the handle
such a manner that the trimmer head is tilted forwards slightly.
Working position 2:
Trimming beneath obstacles
z
and lower the shaft downwards into the
z
and allow the shaft to engage.
t
, extend the handle
must be fastened firmly enough to
h
to the desired incline and
1
and additional handle
1
to the
t
.
h
,
h
in
19