Gardena EHT 410 Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena EHT 410. Gardena EHT 410 9 pages. Tagliasiepi elettrica
Également pour Gardena EHT 410 : (italien) Manuel d'utilisation (11 pages)
Imprimer la page
Two-hand safety switch
Starting the Hedge Trimmer
Stopping the
Hedge Trimmer
Impact protection
Safety Clutch
(Slip-Clutch)
Safety devices
Ergonomic Working Position
The Hedge Trimmer is fitted with a two-hand safety switch to
prevent the tool being turned on by accident. To turn the Hedge
Trimmer on, simultaneously press the start button on the guide
handle and on the grip at the end of the handle.
1. With one hand, hold the guide handle and press the start
button.
2. Then use the other hand to hold the grip at the end of
the handle and press the start button.
➔ The Hedge Trimmer starts moving.
To stop the Hedge Trimmer, simply release one of the start buttons
either on the guide handle or the grip at the end of the handle.
In accordance with safety regulations, an additional safety device
ensures that the blade motion stops within 1 sec.
The projecting guide (impact protection) prevents any kick-back
if the hedge trimmer hits a solid object.
The safety clutch protects motor, gear and blades from mechanical
damage caused by the blades jamming.
If the blades are jammed by an object :
➔ disconnect the trimmer from the power supply and remove
the object.
The safety devices installed by the manufacturer must not be
removed and / or bypassed, e.g. by tying down a switch in the
handle.
Never use a tool which is not complete or which has been
modified from its original design.
To prevent the Hedge Trimmer starting by accident, never carry
the Hedge Trimmer by the start buttons on the guide handle.
Use the belt clip.
.
Hold the grip at the end of the handle
.
when cutting
when cutting
high hedges
low hedges
when using the
Hedge Trimmer
to cut the sides
of hedges
13