KitchenAid 3184435 REV. A Instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} KitchenAid 3184435 REV. A. KitchenAid 3184435 REV. A 5 pages. 27” electric built-in combination microwave and thermal oven, microwave and thermal convection oven, microwave convection and thermal convection oven

Imprimer la page

This appliance should be connected

directly to the fused disconnect

(or

circuit breaker box) through flexible, arm&red or

non-metallic

sheathed, copper cable (with

grounding wire). The flexible armored cable

from the appliance should be connected directly

to the junction box.

IE.I

Locate the junction box to allow as

much slack in the cable as oossible

between the junction box and the ap'pliance so

that the oven can be moved if servicing is ever

necessary. Do Not cut the conduit.

A U.L.-listed conduit connector must

be provided at the junction box.

B-l

A wiring diagram is included in the

W Tech Sheet. The Tech Sheet is located

behind the oven control panel.

Electrical

connection

Electrical

Shock Hazard

Electrical

ground

is required

on this

appliance.

Do Not connect

to the electrical

supply

until appliance

is permanently

grounded.

Disconnect

power to the junction

box

before making the electrical

connection.

This appliance

must be connected

to a

grounded,

metallic,

permanent

wiring

system, or a grounding

connector

should

be connected

to the grounding

terminal

or wire lead on the appliance.

Failure to do so could result in a fire,

personal

injury or electrical

shock.

This appliance is manufactured

with white

(neutral) power supply wire and a cabinet-

connected green grounding wire twisted

together.

Connect the appliance cable to the junction box

through the U.L.-listed conduit connector.

Complete electrical connection

according to

local codes and ordinances.

A. Where local codes permit...

Connecting

the cabinet-grounding

conductor

to the neutral (white) junction

box wire:

Junction

Cable from

power supply

Figure 1

Cable

from oven

connector

Grounded

Neutral

1. Disconnect

the power supply.

2. Remove the terminal block cover.

3. Connect together 3 wires: green and white

appliance cable wires and the neutral (white)

wire in junction box.

4. Connect the two black wires together; then

the two red wires together. See Figure 1.

B. Where local codes Do Not

permit...

Connecting

the cabinet-grounding

conductor

to the neutral (white) junction

box wire:

Junction

Cable from

. --.

-..-,

green

wires

listed

Cable

conduit

from oven

connector

Figure 2

Ungrounded

Neutral

1. Disconnect

power supply.

2. Separate the green and white appliance

cable wires.

3. Connect the white appliance cable wire to the

neutral (white) wire in the junction box.

4. Connect the two black wires together: then

the two red wires together. See Figure 2.

5. Connect the green or bare grounding wire

from the appliance cable to a grounded wire in

the junction box.

C. If connecting

to a four-

wire electrical

system...

Do Not connect

the cabinet-grounding

conductor

to the neutral (white) junction

box wire.

Junction

Cable fron

L-..

power supply

conduit

Figure 3

connector

1. Disconnect

the power supply.

2. Separate the green (or bare) and white

appliance cable wires.

3. Connect the white appliance cable wire to the

neutral (white) wire in the junction box.

4. Connect the two black wires together; then

the two red wires together. See Figure 3.

5. Connect the green appliance cable wire to

the green grounding wire in the junction box.

Now start...

With oven in kitchen.

(1(

Remove shipping materials, tape, and

W protective film from microwave oven.

Do Not remove shipping

base at this time.

121

Remove the racks and other parts from

inside the oven. Remove the air grille

taped to the top or side of oven.

Personal

Injury/Product

Damage Hazard

Use both hands to remove oven door.

Grasp only the sides of oven door.

Do Not use handle or any portion

of the

front frame or trim for lifting.

Because of the weight

and size of the

oven, two or more people are needed to

move and safely install the oven.

Failure to properly

grasp the oven door or

to lift oven properly

could result in

damage to the product

or personal

injury.

131

Completely open the oven door.

Remove the two oven door screws.

(Not all models have oven door screws.)

14.1

Close oven door to the broil position. Grasp the

sides of the oven door and pull the door up and

out of the hinge slots to remove. Set door aside.

Floor Damage

Before moving

oven across floor, check

that oven is on shipping

base or slide

oven onto cardboard

or hardboard.

Failure to follow these instructions

may

result in damage to floor covering.

151

Turn power supply off. Move oven close

' to final position. Remove and discard

shipping base, cardboard or hardboard. Feed

appliance cable through the opening in cabinet.

Make electrical connection.

See "Electrical

requirements"

and "Electrical connection"

sections, Panels A and B.

Product

Damage

Carefully

push against

the seal area of the

oven front frame when pushing

the oven

into the cabinet.

Do Not push against outside

edges.

Failure to follow these instructions

can

result in damage to oven finish.

Panel B