IP Office 1608/1616 Quick
Reference
Appearance Buttons
The phone can handle several simultaneous calls. Each
call uses one of the phone's appearance buttons. By
default these are labelled a=, b=, etc.
1. Pressing an appearance button makes, answers,
holds or unholds the call on that button.
2. The button's lamps indicate the state of its call:
• Slow Green Flash: Incoming call. Pressing the
button answers it and put any other calls on hold.
• Green On: Connected call. Pressing the button
puts the call on hold.
• Fast Green Flash: Held call. Pressing the button
takes it off hold and puts any other calls on hold.
• Red On: The button affected if you lift/replace the
handset or press Speaker or Headset.
Soft Keys
The keys at the base of the screen change depending on
which call appearance button is current highlighted.
1. Use the cursors to move the screen highlight.
2. Moving the highlight does not affect the currently
connected call. This allows you to select soft-key
functions for calls other than the currently connected
one.
Making a Call
If you are not already on a call:
1. Dial the number required.
2. The first available appearance button is used.
Redialing a Previous Number
1. Press Redial.
2. Use the up/down cursor to scroll through the calls.
3. To call the highlighted contact, press Call.
Calling from Your Call Log
Issue 1
You can use your call history to make calls:
October 2022
©
2021-2022, Avaya Inc.
1. Press the Call Log button.
All Rights Reserved.
• Use the left/right cursor to select the type of calls to
display.
2. Use the up/down cursor to scroll through the calls.
3. To call the highlighted contact, press Call.
Calling from Contacts
You can use the contacts directory to make a call. You can
also use contacts in any function where Dir is displayed.
1. Press the key.
2. Use the left/right cursor to select All, Personal,
External, Users and Groups.
3. Use the up/down cursor to scroll through the list.
• Alternatively, simply start dialing the name you want
to display possible matches.
4. To view details of the highlighted contact, press
Details. To return to the directory, press List.
5. To call the highlighted contact, press Call.
Set a Callback
If your call to an internal user is not answered, you can
press AutCB and end the call attempt.
When that user next ends a call, the system calls you.
When you answer, it makes another call attempt to the
internal user.
Answering Calls
A slow flashing green appearance button indicates an
alerting call. If you are currently not on a call:
• Silence the ringing: Press Ignore. The call
continues alerting.
• Redirect to your mailbox: Press To VM if shown.
• Answer: Lift the handset.
• Answer handsfree: Press Speaker.
• Answer on a headset: Press Headset.
Answering Another Call
If you are already on a call, answering a new call
automatically puts the existing call on hold.
1. To answer, press the waiting call's appearance button.
2. Alternatively, using the up/down cursor to highlight the
waiting call. Then select the action you want: Answer,
To VM, Ignore or Drop.
Diverting a Call to Voicemail
You can transfer calls to you directly to your voicemail.
1. If the call is not the currently highlighted, highlight it
using the up/down cursor.
2. Press To VM.
Adjusting the Call Volume
You can adjust the volume of the incoming audio while
you are on the call:
1. With the call connected, press the –/+Volume key.
2. Use the + plus and – minus keys to adjust the volume.
Switching Call Modes
Once you have answered the call, you can switch
between different modes:
• Switch to the handset: Simply lift the handset.
• Switch to handsfree: Press Speaker. Replace the
handset.
• Switch to headset: Press Headset. Replace the
handset.
Holding a Call
1. To hold your current call, press Hold or it's call
appearance button.
2. The held call is shown by its call appearance button
fast-flashing green.
3. While held, the caller hears music on hold or a double
tone every few seconds.
1
Imprimer la page