Gardena THS Li-18/42 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena THS Li-18/42. Gardena THS Li-18/42 16 pages. Telescopic accu hedge trimmer
Également pour Gardena THS Li-18/42 : Manuel de l'opérateur (10 pages), Manuel de l'opérateur (10 pages), Manuel de l'opérateur (10 pages), Manuel de l'opérateur (10 pages)

Gardena THS Li-18/42 Manuel d'utilisation

5. Operation

Working positions:
Tilting the motor unit:
-60°
-45°
-30°
-15°
15°
30°
45°
60°
75°
Extending the telescopic
pipe:
2
18
The hedge trimmer can be operated in 4 working positions
(illustration similar).
Side trimming:
Telescopic pipe
retracted
For trimming at high and low level, the motor unit
at an angle of 75° to – 60 in 15° increments.
1. Remove the battery from the handle (see 4. Initial Operation).
2. Keep both orange buttons
3. Tilt motor unit
1
0
4. Release both orange buttons
engage.
5. Put the battery on the handle (see 4. Initial Operation).
For cutting at high and low heights, the telescopic pipe
continuously extended by up to 50 cm.
1. Remove the battery from the handle (see 4. Initial Operation).
2. Loosen the orange nut
q
require length, and tighten the orange nut
3. Put the battery on the handle (see 4. Initial Operation).
Vertical trimming
Horizontal trimming
at high level:
at high level:
Telescopic tube
Motor unit tilted
extended
by 75°, telescopic
pipe extended
0
pressed.
1
in the required direction.
0
and allow motor unit
q
, extend the telescopic pipe
Trimming at low
level:
Motor unit tilted
by – 60°, telescopic
pipe extended
1
can be tilted
1
to
2
can be
2
to the
q
again.