Gardena 1242 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 1242. Gardena 1242 15 pages. Programming unit
Également pour Gardena 1242 : Manuel d'utilisation (15 pages), Manuel d'utilisation (15 pages)

Imprimer la page

Connect the Control Unit

to the Programming Unit :

Transferring watering

programmes (to the

Control Unit) :

Receiving watering

programmes (transferring

to the Programming Unit) :

Transferring Watering Programmes

Data can only be transferred if both the Programming Unit

and the Control Unit are properly equipped with a 9 V battery.

The Programming Unit must also be set to the main level.

The Control Unit must be connected to the Programming Unit in

order to transfer the watering programmes.

The design of the Control Unit allows for one specific connection

to the Programming Unit only.

v Do not apply excessive force.

1. Insert the Control Unit into the fixture on the underside of the

Programming Unit.

2. Apply slight pressure to the Control Unit until it fits in the

correct position.

Transmitting data to the Control Unit overwrites any exist-

ing watering programmes saved in the Control Unit.

Watering programmes can be transferred to any number of

Control Units quickly and easily.

When transferring the watering programmes to the Control Unit,

the current time, current day and manual watering time are also

transmitted.

Prerequisite : The current time and current day must be set

and you must have already created the watering programme.

1. Connect the Control Unit to the Programming Unit.

2. Press the Menu key repeatedly until the main level (time and

day) is displayed.

3. Press the Transmit key.

The watering programmes are transferred to the Control Unit

and the double arrow symbol appears on the display.

4. Disconnect the Control Unit from the Programming Unit.

5. Connect the Control Unit to your Irrigation Valve.

A pulse is triggered when the two units are connected.

The Control Unit now triggers fully automatic, cordless watering

if the lever of the Irrigation Valve is set to the "AUTO" position.

Transferring data from the Control Unit overwrites the

watering programmes set in the Programming Unit.

1. Connect the Control Unit to the Programming Unit.

2. Press the Menu key repeatedly until the main level (day and

week) is displayed.

3. Press the Read key.

The watering programmes are transferred to the Programming

Unit. The double arrow appears on the display.

ERROR

flashes on the display:

v Please read section 6. Trouble Shooting.