Gardena 1407 Manuel de l'opérateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Gardena 1407. Gardena 1407 13 pages. Flower box watering set
Également pour Gardena 1407 : Manuel d'utilisation (12 pages), Manuel d'utilisation (11 pages), Manuel d'utilisation (11 pages), Manuel d'utilisation (12 pages), Manuel d'utilisation (11 pages)
Imprimer la page
(2)
4. Connect the pump
to the watering control
5. Plug the watering control
(11)
6. Turn the rotary switch
program.
The watering starts and the control lamp
green.
5. MAINTENANCE
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Disconnect the product from the mains before
you maintain the product.
To clean the pump:
DANGER! Risk of injury!
Risk of injury and risk of damage to the
product.
v Do not clean the product with a water jet
(in particular high-pressure water jet).
v Do not clean with chemicals including petrol or
solvents. Some can destroy critical plastic parts.
v Clean the pump with a damp cloth.
6. STORAGE
To put into storage:
The product must be stored away from children.
1. Disconnect the watering control.
2. Clean the pump and the watering control
(see 5. MAINTENANCE).
3. Store the pump and the watering control in a dry,
enclosed and frost-free place.
7. TROUBLESHOOTING
DANGER! Risk of injury!
Injury when the product starts accidentally.
v Disconnect the product from the mains before
you troubleshoot the product.
Problem
The system runs after the pump
has been switched off
Pump is running but the delivery
drops suddenly
Control lamp
(Lc)
on the watering
control does not illuminate [ Fig. O2 ]
(1)
.
(1)
into an electrical outlet.
to the desired watering
(Lc)
illuminates
Possible Cause
Drip heads are below the water
survace.
Foot / Filter is clogged.
Watering control is disconnected.
7. During the first watering, check all connections for
leaks.
If the watering program is to be changed, the rotary
(11)
must first be turned to the OFF position.
switch
To clean the filter [ Fig. M1 ]:
In order to ensure continuous trouble-free operation, the
(14)
filter
should be cleaned at regular intervals.
(12)
1. Push in the two locks
wards.
(14)
2. Clean the filter
and the foot
3. Reassemble all parts in reverse order. Make sure that
(12)
the two locks
are correctly engaged.
The pump must not be operated without the filter
To clean the watering control:
Make sure that the surface and the contacts of the water-
ing control always are clean and dry before you connect
the watering control.
Do not use running water.
v Clean the contacts and the plastic parts with a soft and
dry cloth.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal
household waste. It must be disposed of in line with local
environmental regulations.
IMPORTANT!
Dispose of the product through or via your municipal
recycling collection centre.
Remedy
v Place the first drip head above the
water surface.
v Clean the foot / filter.
v Connect the watering control.
(13)
and pull off the foot
down-
(13)
under running water.
(14)
.
13