Gardena Accu 100 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena Accu 100. Gardena Accu 100 12 pages. Accu edging shears / accu shrub shears
Également pour Gardena Accu 100 : Manuel d'utilisation (13 pages)

Imprimer la page

6. Putting into Storage

Storage / Overwintering :

Disposal :

(in accordance with

RL2002 / 96 / EC)

Disposal of

batteries :

7. Maintenance

DANGER !

Risk of Injury !

WARNING !

Personal Injury and

Damage to Property !

Sharpening the Blades :

Store your Accu Shears out of the reach of children.

1. Clean the Accu Shears and oil the blades

(See 7. Maintenance).

2. Cover the blades with sheath for storage.

3. Charging the battery (see 4. Initial Operation).

4. Store Shears in a cool, dry place where they are protected

from frost.

The product must not be added to normal household waste. It

must be disposed of in line with local environmental regulations.

The GARDENA Accu Shears contains lithium-ion cells that should

not be discarded with normal household waste at the end of their

life.

Li-ion

Please return the lithium-ion cells to your GARDENA dealer or

dispose of them properly at a public recycling centre.

1. Discharge lithium-ion cells completely.

2. Dispose of lithium-ion cells properly.

Blades can cause injury.

v v Do not push the safety lock of the Accu Shears forwards

during maintenance work.

There is a risk of personal injury and damage to the Shears

if you clean them under running water (especially under

high pressure).

v v Never clean your Shears under running water.

To obtain good cutting results, the blades should be cleaned

thoroughly from time to time and should always be sharp.

Always remove notches and burrs caused by stones etc.

immediately.

1. Remove the blades (see 8. Troubleshooting, "Replacing

Cutting Blades" ).

2. Separate the upper blade

3. Remove any grass and dirt between the upper and lower

blades.

4. Sharpen the blades using a sharpening stone.

5. Fit the blades (see 8. Troubleshooting, "Replacing Cutting

Blades" ).

and lower blade