Gardena EVC 1000 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena EVC 1000. Gardena EVC 1000 12 pages. Electric aerator
Également pour Gardena EVC 1000 : Manuel d'utilisation (13 pages), Manuel d'utilisation (15 pages), Manuel d'utilisation (14 pages), Manuel de l'opérateur (9 pages), Manuel d'utilisation (15 pages), Manuel de l'opérateur (9 pages), Manuel d'utilisation (14 pages), Manuel d'utilisation (13 pages), Manuel d'utilisation (13 pages), Manuel d'utilisation (15 pages), Manuel de l'opérateur (10 pages)

Imprimer la page

Problem

Motor cuts out because

blocking protection has

been activated

Aerating results are not

satisfactory

Aerator cylinder no longer

turns

If you have any problem with your Electric Aerator, please contact our Customer Service.

8. Storing Your Electric Aerator

Storage :

Transport :

Disposal :

(in accordance with

RL 2002 / 96 / EC)

9. Accessories

Collecting bag for Electric Aerator EVC 1000

Possible Cause

Blocked by foreign bodies.

Aerating depth too large (aerator

cylinder has been adjusted for

wear without wear to the knives).

The grass is too tall.

Aerator cylinder is worn.

Cog-belt faulty.

Lawn has grown too tall.

Overload protection (torsion

bar) is overturned.

To save space the aerator can be folded up by releasing

the wing nuts.

Take care during this process that the cable does not

become trapped.

v Store the Aerator in a dry, closed room to which children

cannot gain access.

1. Switch off motor, unplug from the mains and wait until the

aerator cylinder stops.

2. Move the wear compensation to the transport position and

raise the aerator when transporting it over sensitive surfaces,

e.g. tiles.

The product must not be added to normal household waste. It

must be disposed of in line with local environmental regulations.

Remedy

1. Switch off the motor, re-

move the mains plug from

the socket and wait until

the Aerator has stopped

rotating.

2. Remove foreign bodies.

3. After approx. 1 minute

switch on the Aerator.

1. Leave motor to cool down.

2. Set adjustment for wear

correctly.

v Mow the lawn before

aerating (see 3. Function

"Correct Aerating" ).

v Adjust aerator cylinder

(see Maintenance).

v Have the machine repaired

by GARDENA Service

v Mow the lawn before using

the Aerator.

v Replace torsion bar.

Art. No. 4065