KitchenAid KHHC2090SBL - Architect 2.0 Cu Ft Microwave Oven Manuel d'instructions d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} KitchenAid KHHC2090SBL - Architect 2.0 Cu Ft Microwave Oven. KitchenAid KHHC2090SBL - Architect 2.0 Cu Ft Microwave Oven 12 pages. Installation instructions

Imprimer la page
NOTE: If no wall studs exist within the cabinet opening, do not
install the microwave oven.
See illustrations in "Possible Wall Stud Configurations."
Possible Wall Stud Configurations
These depictions show examples of preferred installation configurations with the mounting plate.
No Wall Studs at Corner Holes
B
C
A
E
F
Wall Stud at One Corner Hole
B
A
E
C
F
6

Locate Wall Stud(s)

Figure 1
Figure 3
A. Corner holes (on mounting plate)
B. Cabinet opening vertical centerline
C. Wall stud centerlines
D. Holes for lag screws
E. Support tabs
F. Mounting plate center markers
1. Using a stud finder, locate the edges of the wall stud(s) within
the opening.
2. Mark the center of each stud, and draw a plumb line down
each stud center. See illustrations in "Possible Wall Stud
Configurations."
No Wall Studs at Corner Holes
C
B
D
A
A
E
E
F
NOTE: If wall stud is within 6" (15.2 cm) of the vertical
centerline (see "Mark Rear Wall" section), only recirculation or
roof venting installation can be done.
Wall Studs at Both Corner Holes
D
B
A,D
A,D
E
E
C
C
F
Figure 2
Figure 4
C
D
A
E
A,D
E
C