Lexmark MS610de Référence rapide - Page 13

Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} Lexmark MS610de. Lexmark MS610de 17 pages. Ms610 series monochrome laser printer
Également pour Lexmark MS610de : Note technique (3 pages), Manuel (20 pages), Référence rapide (18 pages), Carte du menu (4 pages), Manuel d'impression (4 pages), Manuel d'information (1 pages), Feuille de configuration (2 pages), Manuel des fournitures (2 pages), Spécifications (2 pages)

Imprimer la page
Lexmark MS610de Référence rapide
5
Lift the green flap in front of the printer.
6
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
7
Insert the imaging unit by aligning the arrows on the side rails of
the unit with the arrows on the side rails inside the printer, and
then insert the imaging unit into the printer.
8
Insert the toner cartridge by aligning the side rails of the cartridge
with the arrows on the side rails inside the printer, and then insert
the cartridge into the printer.
9
Close the front door.
10
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
13
[x]‑page jam, open rear door. [20y.xx]
1
Open the front door.
2
Gently pull down the rear door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
to clear the message
.
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
1
2