Gardena V1 Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena V1. Gardena V1 10 pages. Valve box
Également pour Gardena V1 : Manuel d'utilisation (6 pages), Manuel de l'opérateur (11 pages), Manuel d'utilisation (9 pages)
Imprimer la page
V 3 : Close open distributor
output :
9
0
8
A
Assemble the Irrigation Valve
9 V / 24 V (Art. 1251 / 1278) :
D
9
0
8
C
B
Connecting Watering
Valves 24 V (Art. 1278) :
Art. 1280
E
Art. 1280
E
10
If you are only installing 2 valves in a Valve Box V 3, the open
distributor output must be sealed with an end cap.
1. Push the short telescopic pipe
output.
2. Insert the securing clip
0
output
.
The flushing pipe
3. Screw the cover cap
Attention ! Flow direction !
A
V Pay attention to the flow direction (arrows) when
assembling the Irrigation Valve
1. Push the long telescopic pipe
on the outlet-side
2. Screw the short telescopic pipe
Irrigation Valve
the flow direction.
3. Push the Watering Valve with the short telescopic pipe
the distributor output
4. Screw the long telescopic pipe
Irrigation Valve
5. Insert the securing clip
0
puts
and the connections
The telescopic pipes
7
When you open the box lid
marked by the arrows on the Irrigation Valve
You can connect up to 12 Watering Valves Art. 1278 (24 V) to the
Watering Controller 4040 Art. 1276 using the Connection Cable Art.
1280 in combination with the expansion module 2040 Art. 1277.
1. Guide the connection cable
and attach to the terminal strip
the watering controller (refer to colour of cable).
2. Screw one cable from each valve into the connections C.
3. Screw the other cable from
each valve into the connec-
tions 1– 6 according to the
routing of the cables.
4. If you are using 2 Valve
Boxes of model V 3, connect
the second Valve Box V 3 to
the first Valve Box V 3 using
the connection cable.
5. Push the protective cap
both screws
Please refer to the operating instructions for the Programming
Unit Art. 1242 for instructions on how to connect the Watering
Valves Art. 1251 (9V) to the Controllers Art. 1250.
8
into the open distributor
9
into the holes of the distributor
8
is fixed in place.
A
onto the short telescopic pipe
B
all the way into the nipple
7
.
8
C
. The arrows on the Irrigation Valve point in
0
.
B
into the outlet-side of the
C
.
9
into the holes of the distributor out-
7
.
8
B
/
are fixed in place.
D
you can see the flow direction
E
into the side of the Valve Box V 3
F
according to the outputs of
H
G
G
over the terminal strip
H
.
8
.
C
.
into the inlet side of the
8
C
.
F
and tighten
into
H
F