Gardena 4040 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 4040. Gardena 4040 9 pages. Accu-motormäher
Également pour Gardena 4040 : (French) Mode d'emploi (10 pages)

Gardena 4040 Manuel d'utilisation
Problem
Possible cause
Motor turns off.
The cutting height you have
selected is too low;
you are pushing the mower
too quickly.
Circuit breaker has been
activated.
Battery power too low for
cutting height.
Yellow lawn.
Cutting height too low.
Cut not clean.
Blades are blunt or damaged.
If you have any problem with
GARDENA Service Centres
your Accu Cordless Motor Mower,
listed on the back of this leaflet.
please contact our Customer Ser-
vice, or return the defective unit
We expressly point out that,
together with a short description
according to the product lia-
of the problem and, if covered
bility law, we are not liable for
under guarantee, with a copy of
any damage caused by our
the receipt, directly to one of the
units if, in case of repair or

EU Certificate of Conformity

The undersigned
GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 · D - 89079 Ulm
hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the
harmonised EU guidelines, EU standards of safety and product specific standards.
This certificate becomes void if the unit is modified without our approval.
Description of the unit :
Harmonised European
Accu Cordless Motor Mower
standards:
EN 292 -1
Type:
EN 292 - 2
RM 380
EN 836
Art. No.:
EN 60335 -1
4040
prEN 60335 - 2 - 77
EU directives:
Noise level :
Machinery Directive 98 / 37/ EC
measured :
Electromagnetic Compatibility
guaranteed:
89 / 336 / EC
Year of CE marking:
Low Voltage Directive 73 / 23 / EC
1998
Directive 93 / 68 / EC
Directive 2000 /14 / EC
22
Remedy
Let the motor cool for 5 -10 min-
utes, then use the mower with
a higher cutting height and
reduce the cutting height in
stages until you reach the lower
cutting height you require.
Push the Motor Mower more
slowly across the lawn.
Increase the cutting height and
cut the lawn in stages or charge
the accu (see Chapter 7.2 "The
Accu").
Increase the cutting height.
Have the blade replaced at a
GARDENA Service Centre or
by an authorised specialist.
exchange, other than original
GARDENA parts are used and
repair is not carried out by a
GARDENA service centre or
an authorised specialist.
The same also applies to spare
parts and accessories.
Ulm, 06.05.2002
Thomas Heinl
Technical director
84 dB (A)
86 dB (A)
G