Makita 2-SPEED HAMMER 8401 Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 2-SPEED HAMMER 8401. Makita 2-SPEED HAMMER 8401 12 pages. 13 mm (112”) 2-speed hammer drill variable speed i reversing
Imprimer la page
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking t o
see that keys and adjusting wrenches are removed from tool before turning
it
on.
15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch.
Be sure switch is OFF when plugging
in.
16. EXTENSION CORDS. Make sure your extension cord is in good condition.
When using an extension cord, be sure t o use one heavy enough t o carry
the current your product will draw. An undersized cord will cause a drop
in line voltage resulting in loss of power and overheating. Table 1 shows the
correct size t o use depending on cord length and nameplate ampere rating.
If in doubt, use the next heavier gage. The smaller the gage number, the
heavier the cord.
TABLE
1
MINIMUM
GAGE
FOR CORD
SETS
0
-
6
6
-
10
10
-
12
12
-
16
~~
~
~
Total Length of Cord in Feet
0 - 2 5
I
26
-
50
I
51
-
100
I
101
-
150
18
16
14
16
16
14
12
14
12
Not Recommended
18
16
; :
I
12
Ampere Rating
More
Not More
Than
Than
A W G
3