Avaya H209 Manuel - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Avaya H209. Avaya H209 19 pages. Installing and administering
Également pour Avaya H209 : Utilisation du manuel (19 pages)
2. Do one of the following:
• To delete a specific memory, press DELETE.
The programmer displays DELETE?.
• To delete all memory locations, press DELETE until the programmer displays DELETE
ALL?.
3. To delete the specific or all memory locations, press DELETE.
4. To exit, press PROG.
Transferring stored numbers in the phone
Before you begin
Ensure that the Avaya H219 analog phone to be programmed is not connected to the telephone
line before connecting it to the memory programmer.
Procedure
1. Connect one end of the cable to socket J1 of the memory programmer and the other end
to socket J6 of the phone.
Socket J6 is located under the faceplate.
The programmer displays CONNECTED.
2. To upload the stored number in the telephone, press UPLOAD.
The programmer displays UPLOADING. If the uploading is successful, the programmer
displays OK. If the uploading fails, the programmer displays ERROR!.
3. Disconnect the cable from the phone.
Feature Access Codes
You can use Feature Access Codes (FAC) to provide users with quick access to certain features
of the phone. Avaya H219 analog phone programmable buttons are programmed with default
feature access codes. You can configure Avaya Aura
access the functions. You can also assign functions to the Avaya H219 analog phone
programmable buttons or voice mail button using the Avaya H200 Programmer.
The following table lists the default FAC corresponding to the programmable buttons on Avaya
H219 analog phones:
January 2020
Installing and Administering the Avaya H209 and H219 Phones
Comments on this document? [email protected]
Transferring stored numbers in the phone
®
or IP Office to use these default FAC to
15