Makita 6093DW Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 6093DW. Makita 6093DW 16 pages. Equipped with electric brake 10 mm (3/8") with fast charger
Également pour Makita 6093DW : Manuel d'instruction (17 pages)

Imprimer la page

Adjusting fastening torque

The fastening torque can be adjusted in six

stages by turning the adjusting ring so that

the pointer on the adjusting ring points to

a number on the tool body. The fastening

torque is minimum when the pointer points

to the number 1 and maximum when it

points

to the -,_,= marking.

The clutch

will slip at varying torque levels when the

pointer

is set at the numbers 1 to 5. The

clutch is designed not to slip at the

-,_=

marking.

Before actual operation,

drive a trial screw

into your material

or a piece of duplicate

material to determine which torque level is

required for a particular application.

Adjusting

ring

Pointer

NOTE

The

adjusting

ring cannot

be locked

with

the pointer

positioned

half-way

between

the

numbers.

Screwdriving operation

Place the point

of the driver bit

in the

screw head and apply pressure to the tool.

Start the tool slowly and then increase the

speed gradually. Releasethe trigger as soon

as the clutch cuts in.