Makita 6095D Manuel d'instruction - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 6095D. Makita 6095D 15 pages. Cordless driver drill
Également pour Makita 6095D : Manuel d'instruction (14 pages), Liste des pièces (3 pages)
Imprimer la page
Reversing switch action
This tool has
a
reversing switch to change
the direction of rotation. Slide the revers-
ing switch to the right for clockwise rota-
tion or to the left for counterclockwise.
CAUTION :
Always check the direction of rotation before operation.
Use the reversing switch only when the tool comes t o
a
complete stop. Changing the
direction of rotation before the tool stops may ruin the tool.
Speed change
To change the tool speed, turn the speed
change knob so that the arrow of the de-
sired meed on the knob i s aligned with the
Speed change knob
0
-
1,100 Rlmin.
Adjusting fastening torque
The fastening torque can be adjusted in
six stages by turning the adjusting ring so
that the pointer on the adjusting ring
points to a number on the tool body. The
fastening torque
i s
minimum when the
pointer points to the number 1 and maxi-
mum when it points t o the--
marking.
The clutch will slip a t varying torque levels
when the pointer is
set
a t the numbers 1 t o
5. The clutch is designed not to slip
a t
Adjusting ring
Pointer
the
-\-
marking.
I
I
Before actual operation, drive
a
trial screw into your material or
a
piece
of
duplicate
material to determine which torque level is required for a particular application.
NOTE :
The adjusting ring cannot be locked with the pointer positioned half-way between the
numbers.
8