Gardena 8886 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 8886. Gardena 8886 15 pages. Accu shears
Également pour Gardena 8886 : Manuel d'utilisation (9 pages), Manuel d'utilisation (15 pages), Manuel d'utilisation (15 pages), Manuel d'utilisation (16 pages), Manuel d'utilisation (16 pages), Manuel d'utilisation (10 pages), Manuel d'utilisation (17 pages), Manuel d'utilisation (16 pages), Manuel d'utilisation (16 pages)

Imprimer la page
Gardena 8886 Manuel d'utilisation

4. Operation

WARNING!
Risk of Injury!
Cut grass / shrubs:
8
7
5
6
8
7
Telescopic Swivel Handle
Art. 8899 (optional):
9
0°
45°
0
90°
135°
-135°
180°
16
There is a risk of injury if the switching devices installed
on the Shears are removed or bridged (e. g. by fastening the
on switch to the handle). This prevents the Accu Shears
switching off automatically.
v Never remove or bridge the switching devices.
The starting lockout
being switched on unintentionally.
1. Grass Shears:
Clear the area to be cut of stones and other solid objects and
remove the blade guard
Accu Shrub Shears:
Remove the blade guard
2. Ergonomic design ComfortCut:
Press elbow joint
6
with blade to desired angle.
3. Cutting:
Disengage the starting lockout
and press the ON button
5
again.
The GARDENA Telescopic Swivel Handle Art. No. 8899 for the
Accu Shears can be mounted in 45° steps. The swivel handle is
fully height adjustable (85 – 120 cm) and can be adapted to suit
your height.
v Slide blade protection
Fitting the Telescopic Swivel Handle:
M
1. Remove plug
2. Guide the swivel handle
holder of the Accu Shears until the lock engages.
Removing the Telescopic Swivel Handle:
1. Press the release button
2. Insert plug
-45°
The starting lockout
no longer function when the swivel handle is mounted.
-90°
7
prevents your GARDENA Accu Shears from
5
from the cutting blade.
5
from the cutting blade.
6
on both sides and adjust motor housing
7
8
. Release the starting lockout
5
onto shear blade.
M
using a screwdriver.
9
at the desired angle into the handle
0
and pull out the swivel handle.
M
again.
7
and ON button
by pushing it forwards
8
on the Accu Shears
7