Lexmark MS812dn Manuel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Lexmark MS812dn. Lexmark MS812dn 20 pages. Ms811/ms812 series monochrome laser printer
Également pour Lexmark MS812dn : Note technique (3 pages), Manuel d'information (1 pages), Manuel de déménagement (3 pages), Manuel papier (4 pages), Carte du menu (3 pages), Manuel des fournitures (3 pages), Feuille de configuration (2 pages), Manuel des défauts d'impression (1 pages), Manuel (17 pages), Manuel d'impression (18 pages), Fiche technique (2 pages)

Imprimer la page
Lexmark MS812dn Manuel
Action
Replace the imaging unit, and then resend the print job.
Is the print density uneven?

Vertical voids appear on prints

Leading edge
Trailing edge
Action
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do vertical voids appear on prints?
Step 2
a
From the printer control panel, set the paper type and weight in the Paper
menu to match the paper loaded in the tray.
b
Resend the print job.
Do vertical voids appear on prints?
Step 3
Check if you are using a recommended type of paper.
a
Load the specified tray or feeder with a recommended type of paper.
b
Resend the print job.
Do vertical voids appear on prints?
Step 4
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
3
Reinstall the imaging unit, and then the cartridge.
b
Resend the print job.
Do vertical voids appear on prints?
Print quality Guide
Page 18 of 19
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Go to step 2.
The problem is solved.
Go to step 3.
The problem is solved.
Go to step 4.
The problem is solved.
Go to step 5.
The problem is solved.