Makita 6228DWE Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 6228DWE. Makita 6228DWE 19 pages. 9.6 v
i2 v
14.4 v
Également pour Makita 6228DWE : Manuel d'instruction (19 pages), Manuel d'instruction (19 pages), Manuel d'instruction (19 pages)
Imprimer la page
ToolUseandCare
12.Use
clamps or other practical way to secure and support the workplace
to
a stable platform.
Holding the work by hand or against your body is unstable
and may lead to loss of control,
13. Do not force tool. Use the correct tool for your application.
The correct tool
will do the job better and safer at the rate for which it is designed.
14. Do not use tool if switch does not turn It on or off. A tool that cannot be
controlled with the switch is dangerous and must be repaired.
15. Disconnect
battery pack from tool or place the switch in the locked or off
position before making any adjustments,
changing
accassorles,
or storing
the tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
16. Store idle tools out of reach of chlldrsn
and other untrelced
persons. Tools
are dangerous in the hands of untrained users,
17. When battery pack is not In use, keep It away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection
from one terminal
to another.
Shorting
the battery
terminals
together may cause sparks, burns, or a fir_
18. Maintain
tools with
care. Keep cutting
tools sharp and clean.
Properly
maintained tools with sharp cutting edge are less likely to bind and are easier
to control.
19. Check for mlsallgnmcnt
or binding of moving parts, breakage
of parts, end
any other condition that may affect the tool's operation. If damaged,
have
the tool serviced
before
using.
Many
accidents
are caused
by poorly
maintained
tools.
20. Use only eccassodes
that are recommended
by the manufacturer
for your
model. Accessories that may be suitable for one tool may create a risk of injury
when used on another tool.
Service
21. Tool service must be performed
only by qualified repair personnel.
Service
or maintenance performed by unqualified personnel may result in a dsk of injury.
22.When
servicing
•
tool,
use only
Identical
replacement
parts.
Follow
Instructions
In the Maintenance
section
of this manual. Use of unauthorized
parts or failure to follow Maintenance
Instructions may create e risk of shock
or injury.