Makita 6300D Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 6300D. Makita 6300D 15 pages. 13 mm (1/2") equipped with electric brake

Imprimer la page

Overload protector

The overload protector automatically cuts

out to break the circuit and the button

pops out, whenever heavy work is pro-

longed. When this occurs, release the trigger

switch and withdraw the tool from the

workpiece. Wait 20 - 30 seconds before

pressing the restart button to resume

operation.

4.8 (3/16")

CAUTION

Your finger should not be on the trigger when you press the restart button.

3.1

3.4

/8" - 9/64")

Screwdriving operation

Place the point

the driver bit in the

screw head and apply pressure to the tool.

Start the tool slowly and then increase the

speed gradually. Release the trigger just as

the screw bottoms out. The electric brake

will then stop the tool immediately, pre-

venting the screw and/or bit from being

damaged.

NOTE

*Make sure that the driver bit is inserted straight in the screw head, or the screw and/or

bit may be damaged.

When driving wood screws, predrill Pilot

holes to make driving easier and to pre-

3.1 (1/8")

3.5 (9/64")

(3/32" - 3/32")

vent splitting of the workpiece. See the

chart.

4.5 (11/64")

(7/64"

1/8")

5.5 (7/32")

5.8 (I-'"'''