Alien KYDZ-306 Manuel d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Alien KYDZ-306. Alien KYDZ-306 4 pages. Portable key cutting machine

Imprimer la page

Emergency stop button

Instructions for use of emergency stop button:

1.When an emergency occurs or the key processing is finished, the

power supply can be cut off by directly pressing the knob vertical-

ly;

2.According to the direction of the arrow, turn the knob clockwise

about 45 degrees to turn on the power supply of the device.

Cutting collecting box

Instructions for use of cutting collection box:

1.When the cutting waste needs to be treated, it can be directly

pulled out of the lower cutting collection box and the waste can

be poured out;

2.When storing, directly aim at the mouth and push forward.

matters needing attention

Please read the product operation manual carefully before use;

Wear safety goggles in accordance with ANSI standard when

working;

Do not put your hand into the working area when the machine

is running;

Keep children away from the machine;

When not in use for a long time, please cut off the power

supply;

Ensure that there is no chip residue during packaging and

transportation;

Do not use air jet gun and other tools to clean the chips;

Intelligent tooth shape recognition

Instructions for intelligent tooth shape recognition:

1.Insert the key into the fixing hole;

2.On the screen, check whether the key embryo is deviated great-

ly; if it is skewed, the key position can be adjusted left and right;

3.After reading the key sequence, pull out the key directly.

Please keep the worktable clean;

This machine has built-in lithium battery pack. Please do not

disassemble it without permission. Keep the machine away

from high temperature and fire source

The machine should be placed in the area of light proof, rain

proof and waterproof.

Manufacturer:Wuxi Keyoung Electronic Technology Co., Ltd

QQ:3004280989

WEB:www.kydz-wx.com

Address:5-302,5-301 Huaqing Creative Park,Huishan Economic

Development Zone, Wuxi, Jiangsu

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

the equipment.

The distance between user and products should be no less than 20cm.