A&E Systems 972 Oasis-Elite Series Manuel d'utilisation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} A&E Systems 972 Oasis-Elite Series. A&E Systems 972 Oasis-Elite Series 7 pages. Automatic and manual rv door awning system

Imprimer la page

SAFETY INSTRUCTIONS

This manual has safety information and instructions

to help users eliminate or reduce the risk of acci-

dents and injuries.

RECOGNIZE SAFETY INFORMATION

This is the safety-alert symbol. When you see this

symbol in this manual, be alert to the potential for

personal injury.

Follow recommended precautions and safe oper-

ating instructions.

UNDERSTAND SIGNAL WORDS

A signal word , WARNING OR CAUTION is used

with the safety-alert symbol. They give the level of

risk for potential injury.

WARNING

: means if the safety information is

not followed someone could be injured or killed

and/or damage to equipment could occur.

CAUTION:

means if the safety information is

not followed someone might be injured and/or

damage to equipment might occur.

Read and follow all safety information and instruc-

tions.

Learn how to operate the awning properly.

GENERAL INFORMATION

IMPORTANT !

Important:

Read all of the following steps before

beginning installation.

The Dometic Corporation reserves the right to modify appear-

ances and specifications without notice.

Important:

This awning must be installed by a quali-

fied person.

A. POSITION OF THE AWNING

1 . Before beginning installation of the case, be sure the

door will open when the awning is completely ex-

tended. Allow for a natural downward slant of the

awning. Check for a solid backing or under-structure

where screws are to be used.

3 . Before drilling, be sure that there are no obstacles

inside the wall (cables, wires, gas pipes, etc.).

4 . Minimum clearance from bottom of case to door is

3.00 inches.

INSTALLATION INSTRUCTIONS

A.AWNING RAIL INSTALLATION

1 . Secure awning rail to side of RV at the desired location

using # 6 x 1" wood screws (not provided). Awning rail

must be located at least 8" above the door. This will

allow the door to open when the awning is in the extend

p o s i t i o n .

Important:

Structural backing is required where

mounting screws will be installed through sidewalls for

securing Awning Rail.

FIG. 1

AWNING RAIL

AFTER

FLARING