Alien Aircraft Corp Hornet K-107 Manuel d'instructions de montage - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Alien Aircraft Corp Hornet K-107. Alien Aircraft Corp Hornet K-107 17 pages.
Imprimer la page
20...Glue F-16 into position on the bottom rear of the fuselage.
21...Glue F-17 into position on the top of the fuselage.
Building the Hatch:
22...Glue parts H-2, H-3 and H-4 into position on the hatch (H-1)
using the laser marking as a guide. Glue parts H-5 and H-6 together.
Make sure that they are 90 degrees to each other.
23...Place parts H-7 into position on the hatch. Insert H-5/6 position
to establish the proper spacing for the H-7's. Use the tip of a straight
pin to apply a tiny amount of glue to the outside edges of the H-7's.
Use extreme care to make sure that you DO NOT glue the H-5/6 slider
into position!!!
24...With the H-5/6 slider in position, carefully glue the two H-8
pieces into position. Use the tip of a straight pin to apply a tiny
amount of glue to the outside edges of the H-8's. Use extreme care to
make sure that you DO NOT glue the H-5/6 slider into position!!!
Page 8