A&E Trading TM262 Instructions de montage - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} A&E Trading TM262. A&E Trading TM262 9 pages.
Imprimer la page
Using the handswitch TMU30
Connection from the handswitch to the controlbox
Connect the handswitch tot he correct port of the controlbox.
General functions:
1.
Initialize the controlbox (manual reset)
The controlbox must be initialised. Keep the 'up' and 'down' button pressed until the table reaches is't
lowest position and the controlbox gives an acoustic signal.
2.
Using the handswitch to move the table Up or Down
- Press the UP button to move the table up.
- Press the DOWN button to move the table down.
The table moves as long as you press a button.
3.
Save a position (memory)
- Set the table height with 'UP/DOWN'.
- Press M 3 x to get in to the memory mode.
- Then press M1, M2 of M3 within ± 5 seconds to save the chosen height.
- The controlbox 'beeps' as a signal to confirm saving is completed.
4.
Calling a stored position
- Press M1, M2 or M3 until the stored position is reached.
A&E Trading b.v. | Mounting Instructions TM262
7