ALIEN POWER SYSTEM ESC Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ALIEN POWER SYSTEM ESC. ALIEN POWER SYSTEM ESC 6 pages.

The installation of the ESC Computer program Software is as the same as a normal

windows software. In windows system, you simply run the setup file, and then install it

according to the prompt. After installation has finished, you can run the software. The APS SETUP program software

can be downloaded from our website. Download page. Please NOTE: The file is a zip file so it needs to be

This is very important. Disconnect the battery, the motor and the receiver. The ESC needs to be

connected on its own to the PC

Plug the USB link to your PC (please note that the USB driver is needed for the USB to work. Windoes XP

and 7 need the prolific driver to be installed. Win 8, 10 and new will automatically install the driver once

the USB link is plugged in your PC)

Launch the APS ESC Computer Link Software.

Now select the right COM port and plug your ESC to your PC. Make sure the 4 ESC pin colour match the

USB pin colour. Wrong connection can damage the ESC. If you connect correctly, the ESC type will

display in the ESC type window. If it doesn't display correctly, you can pull the 4pin wires and plug again,

decompressed

How to program the ESC by PC software