A&L Furniture VersaLoft Instructions de montage - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} A&L Furniture VersaLoft. A&L Furniture VersaLoft 4 pages. Mission hanging daybed

Imprimer la page
PARTS
(included)
Headboards (2)
Backrest (1)
Front Rail (1)
Mattress Boards (7)
TOOLS NEEDED
Power Screwdriver
STEP 1
Insert two dowel nuts in the holes in each end of the bottom backrest board and on the inside of the front
rail. Push them in all the way and turn so the threaded holes align with the holes in the ends of the rails.
(See photos 1 & 2.)
c
photo 1
STEP 2
Attach the backrest to the back posts. Place the bottom rail in the notches in the inside of the posts. Insert
four 2¾" bolts through the top and bottom holes in the posts. Turn the top bolts into the threaded inserts in
the backrest and the bottom bolts into the dowel nuts in the bottom rail. A straight screwdriver can be used
to properly align the dowel nuts. (See photo 3.)
b
x2
b
x2
STEP 3
Place the front rail in the notches in the front posts. Turn two 2¾" bolts into the dowel nuts in each end.
(See photo 4.)
c
c
x2
photo 3
HARDWARE
a
4" Eyebolts (4)
b
2¾" Bolts (12)
c
Dowel Nuts (8)
d
1¾" Screws (30)
Allen Wrench (1)
e
Square Drive Bit (1)
f
Chains or Ropes (4)
g
b
x2
(included)
photo 2
photo 4
c
x2