A&S Studio Bar 200 Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} A&S Studio Bar 200. A&S Studio Bar 200 16 pages. 2.1 bar with built-in subwoofer 200
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when
using this unit, check the following points before requesting service.
No power
-
Ensure that the AC cord of the soundbar is connected properly.
-
Ensure that there is power at the AC outlet.
Remote control does not work
-
Before you press any function buttons, first select the correct source.
-
Reduce the distance between the remote control and the unit.
-
Insert the batteries with their polarities (+/-) aligned as indicated.
-
Replace the batteries.
-
Aim the remote control directly at the sensor on the front of the unit.
Loud hum or noise is heard
-
The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with an appropriate
non-abrasive cleaning solution.
The unit does not respond when pressing any buttons
-
The unit may freeze up during use. Switch the unit off and then on again at the mains socket to
reset the unit.
No sound output
-
Make sure that the unit is not muted. Press MUTE or VOL + to resume normal listening.
-
Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM
mode while using optical connection.
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth
pairing
-
Ensure that the unit is switch on.
-
Ensure that the Bluetooth function is activated on your Bluetooth device.
This is a 15 mins power off function, one of the ERPII standard requirement for saving
power
•
When the unit's external input signal level is too low, the unit will be turned off automatically in 15
minutes. Please increase the volume level of your external device.
15