Align-Pilates A2 Manuel d'instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Align-Pilates A2. Align-Pilates A2 16 pages. Full cadillac

Imprimer la page

3. Attaching the legs

Begin by inserting the frame into the legs. Ensure that the frame head end and the head end

legs are at the same end. These have pre drilled holes as per Fig.1. Attach them using x32 small

nuts and washers provided - x8 per corner, x4 on the outside of the frame (Fig.2) at each corner

and x4 on the inside of the frame at each corner (Fig.3).

4. Attaching the leg brackets

Attach the leg brackets using the x4 medium bolts and washers with

loctite through the frame, Fig.4. Using x3 small bolts with washers attach the top of the bracket to

the underside of the frame with x2 bolts and washers and then into the vertical leg from the inside

with the last bolt and washer. Now bolt on the mattress - there are 2 bolt holes though each of

the two end cross supports Your frame should now look as

below in Fig.5. To secure the legs, use x2 of the x4 long bolts at either end, insert vertically into the

frame (Fig.6).

Fig.4

5. Attaching the headrest

To attach the headrest use x4 bolts into the frame in the drilled headrest holes shown in Fig.7.

Fig. 1

Fig. 2

Fig. 5

Fig. 7

Fig. 3

Fig. 6