AEG 79669GO-MN Manuel de l'utilisateur - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG 79669GO-MN. AEG 79669GO-MN 48 pages.

INSTALLATION OF THE APPLIANCE (CONTINUED)

Slot-in Installation

Slot-in Conversion

To convert the free standing appliance to a slot in

installation the kick panel provided on the appliance

is removed and the appliance is mounted on a plinth .

This enables a continuous cupboard kick board to

be installed, giving a more integrated appearance .

There is no clearance requirement between oven and

adjacent side cabinets .

600mm minimum vertical

clearance from combustible

surfaces or a Rangehood .

Refer to Rangehood

instructions for minimum

clearance to the hob .

The greater applies .

To remove the appliance kick panel

• Remove all loose parts ie . Burner crowns & caps,

trivets, oven shelves .

• Carefully lay down the appliance onto one side onto

foam packaging and remove the screws as shown

from each corner bracket .

600mm

900mm minimum

This surface is to be

level with the top edge

of the kickboard

Remove 4 screws on

each corner bracket