Alinco DR-235T Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alinco DR-235T. Alinco DR-235T 10 pages. Amateur mobile radio transceiver
Imprimer la page
Primary Functions
PWR
Power turns ON/OFF whenever power supply switch is pressed.
V olume knob
Dial
FUNC/SET
V/M/MW
MHZ/SHIFT
TSDCS/LOCK Sets the tone squelch and DCS setting.
CALL/H/L
SQL/D
DATA Terminal
TX Light indicator
Mic. Connector
Functions which can be activated while F appears, after pressing the FUCN Key.
FUNC/SET
Confirms selection of other functions and exits the function mode.
V/M/MW
MHZ/SHIFT
Sets the shift setting and the offset frequency.
TSDCS/LOCK
CALL/H/L
SQL/D
Functions that can be activated while pressing the FUNC Key
PWR
Reset to factry defalt settings.
V/M/MW
MHZ/SHIFT
Switches to wide / narrow mode reception.
TSDCS/LOCK
CALL/H/L
SQL/D
Functions that requires continuous pressing to be activated.
FUNC/SET
When press within 2 seconds, it accesses the set mode
SQL/D
Adjusts the volume level.
Changes the frequency, memory channel and scan direction.
Sets in the function mode to access additional setting.
Switches between VFO mode and memory mode.
Changes the frequency in 1 MHz steps.
Switches to CALL mode.
Sets the squelch level
Used in clone and burglar alarm functions.
Lights on during transmission.
Connectino port for supplied microphone.
Write in to memory channel.
Sets the key lock function.
Switches between HI, MID, and LOW power transmission.
Accesses the 9600 bps packet communication mode.
Erase the memory.
Sets the auto dialer.
Accesses the clone function mode.
Accesses the power supply voltage indication mode.
When press within 1 second, the monitor function is on.