AEG B9872-5 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG B9872-5. AEG B9872-5 32 pages. Aeg oven

• Keep the appliance clean at all times. A build-up of fats or other foodstuff can result

in a fire.

• Regular cleaning prevents the surface material from deteriorating

• Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains

that can be permanent.

• For your personal safety and the safety of your property, only clean the appliance with

water and a soap. Do not use flammable products or products that can cause corrosion.

• Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects,

abrasive cleaning agents, abrasive sponges and stain removers

• If you use an oven spray, follow the instructions from the manufacturer.

• Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resist-

ant surface of the inner glass can break and shatter.

• When the door glass panels are damaged they become weak and can break. You must

replace them. Contact the service centre.

• Be careful when you remove the door from the appliance. The door is heavy!

• Do not clean catalytic enamel (if applicable).

Risk of fire

• Open the door carefully. The use of ingredients with alcohol can cause a mixture of

alcohol and air. There is the risk of fire.

• Do not let sparks or open flames come near the appliance when you open the door.

• Do not put flammable products or items that are wet with flammable products, and/or

fusible objects (made of plastic or aluminium) in, near or on the appliance.

• Do not leave the appliance unattended during Pyrolytic cleaning.

• Do not try to open the door and do not cut the power supply during Pyrolytic cleaning.

• Keep children away during pyrolytic cleaning. The appliance becomes very hot. There is

the risk of burns.

• During pyrolytic cleaning, stubborn dirt can cause discoloration to the enamel. Discol-

oration to the enamel has no effect on the performance of the appliance

• Disconnect the appliance from the power supply before the replacement of the oven

lamp. There is the risk of electrical shock!

• Only an approved engineer can repair or work on the appliance. Contact an approved

service centre.

• Use only original spare parts.

• To prevent the risk of physical injury or damage

– Disconnect the appliance from the power supply.

– Cut off the mains cable and discard it.

– Discard the door catch. This prevents children or small animals from being closed

inside of the appliance. There is the risk of suffocation.

Safety information